KYB series Hydraulic motor Accessories_piston Variable motors Parts
Hydraulic pump motor parts are the various components that make up a hydraulic pump, which is used to convert mechanical energy into hydraulic energy. The hydraulic pump motor provides the power needed to move hydraulic fluid through a system, and thus it is an essential component of many types of machinery, particularly in construction, manufacturing, and industrial applications.
Here are some of the parts typically found in a hydraulic pump motor assembly:
Casing/Housing: Provides the outer shell of the pump and contains the internal components, protecting them from external elements and contaminants.
Rotary Group: This includes the rotating parts like the rotor, vanes, or pistons, depending on the type of pump (gear, vane, or piston pump). These parts are responsible for creating the pumping action.
Bearings or Bushings: Reduce friction and support the rotating parts within the casing.
Shaft Seal: Prevents hydraulic fluid from leaking out of the casing where the shaft exits the pump.
Inlet and Outlet Ports: These are passages for hydraulic fluid to enter and leave the pump. The inlet is connected to the hydraulic reservoir and the outlet is connected to the hydraulic system.
Gears (Gear Pump): In a gear pump, there are typically two gears - a drive gear (connected to the motor shaft) and a driven gear - which interlock to move hydraulic fluid.
Vanes (Vane Pump): These are slotted into the rotor and extend to the casing walls, creating chambers for fluid transport.
 |
PSVD2-13E/16E/17E/19E/21E/26E/27E/57E 1. Cylinder block 2. Piston shoe 3. Valve plate 4. Ball guide 5. Retainer plate 6. Drive shaft |
 Uploading pictures... |
MSG-18P/27P/44P/50P SWING 1. Cylinder block 2. Plunger 3. Valve plate 4. Ball guide 5. Retainer plate 6. Drive shaft 7.Thrust plate |
 |
AG10/12/18/26/33/44/50/85/120/150/170/200/230VP/330 1. Ball guide 2. Cylinder block 3. Plunger 4. Valve plate 5. Retainer plate |
 Uploading pictures... |
KYB87 PUMP 1. Plunger 2. Cylinder block 3. Drive shaft 4. Retainer plate 5. Valve plate |